How to charge Meta Ray-Ban Display
Meta Ray-Ban Display comes with a charging case that has its own rechargeable battery, allowing you to charge your glasses on the go. Your glasses charge while docked in the case, and you can charge your case using a USB-C cable.
How to charge Meta Ray-Ban Display
To charge your glasses:
- Close the arms and slide the glasses into the case so that the nose bridge makes contact with the case.
- The LED inside the case by the nose bridge will turn on to indicate the glasses are charging.
How to charge Meta Ray-Ban Display charging case
To charge your case:
- Plug the USB-C cable into the USB-C port on the side of the charging case.
- Plug the other end of the USB-C cable into a power adapter, then plug the power adapter into a power source.
- The LED on the case next to the USB-C port will turn on to indicate the case is charging.
Meta Ray-Ban Display charging case LEDs
The charging case has two LEDs - one LED inside the case that displays the charge status of your glasses, and one LED outside the case that displays the charge status of your case.
Inner LED
The inner LED will display charge status when you dock or remove your glasses from the case.
Inner LED status | What it means |
Green solid light | Full charge (>95% battery) |
Orange solid light | Partial charge (20-95% battery) |
Orange blinking light | Low charge (<20% battery) |
Red blinking light | Charging error* |
Outer LED
The outer LED will display charge status when you open or close the case or when you insert or remove the USB-C cable from the port.
Outer LED status | What it means |
Green solid light | Full charge (>75% battery) |
Orange solid light | Partial charge (20-75% battery) |
Orange blinking light | Low charge (<20% battery) |
Red blinking light | Charging error* |
*Charging error
There are two reasons why you may be receiving a charging error:
- Liquid detected: Liquid is interfering with the charging interface between the nose bridge of your glasses and the charging case. Wipe the charging contacts clean on both devices and try again.
- High temperature: The charging case or your glasses have reached a temperature that is too high to charge. Move your case and glasses into a cooler location.
How to fold Meta Ray-Ban Display charging case
The charging case can be folded flat for convenient storage when not in use. Make sure the glasses are removed from the case before folding.
To fold charging case:
- Hold the case in two hands.
- Push the side flaps in and hold them down.
- Fold the bottom flap over the side flaps and push down until the magnets connect, holding everything in place.
- Fold the top flap toward the case, then fold again until the magnets connect.
Learn more about how to remove Meta Ray-Ban Display from the charging case.