Meta Quest 3 Open Facial Interface
The Meta Quest 3 Open Facial Interface is only compatible with Meta Quest 3. For Quest 3S, see the breathable facial interface.
The Meta Quest 3 Open Facial Interface is designed to replace the stock facial interface included with Quest 3 headsets. Its flexible design allows for more even weight distribution and a fit that adapts to your face. Open peripheries let more of your real environment into mixed reality gaming, fitness or productivity experiences, and allows more airflow to keep you cool.
The Meta Quest 3 Open Facial Interface is available in the Meta Store and at selected retailers.
Install the Meta Quest 3 Open Facial Interface
Start by removing your existing facial interface from your headset:
- Tilt the strap arms up and away from the included facial interface.
- Hold the headset with one hand and the facial interface with the other, then pull until the facial interface detaches.
Next, attach the new facial interface:
- Take your Open Facial Interface and align it with your headset.
- Press the headset and the facial interface together until you hear them snap into place.
- Apply pressure to each of the four connection points (not the flexible frame) to ensure they have all fully attached:
- Two connection points can be found near the headset’s nose cutout. One on each side.
- Two connection points can be found near the upper head strap, above the lenses. One on each side of the strap.
Cleaning the Meta Quest 3 Open Facial Interface
To clean your Open Facial Interface:
- Wipe away any sweat or liquid on the facial interface with a dry microfibre cloth.
- For a deeper clean, remove the facial interface (using the same method described above) from your headset before hand washing with cool water and a mild liquid detergent.
- The facial pad can be removed from the facial interface and cleaned separately.
- Rinse thoroughly, wipe away any detergent residue and allow to air dry before reinstalling the facial interface.
To remove the facial pad:
- Separate the facial interface from the headset using the method described above.
- Starting at one end of the facial pad (left or right), pull until the whole pad is removed.
To reattach the facial pad:
- Line up the center notch on the facial pad with the guide on the plastic frame.
- Press along the edges of the facial pad to ensure it is securely attached all the way around the frame.