Set up your Meta Portal

40 Likes
Updated:3 days ago

Before setting up your Meta Portal:

You can use a screen reader to set up your Meta Portal, If you're having trouble using your Meta Portal's touch screen during setup, learn more about turning off accessibility options.

To turn on your device:

  1. Slide the cover off your box, open the box and pull the device towards you.
  2. Remove plastic packaging. If the plastic packaging is covering your microphone, you will have trouble making calls and using assistants.
  3. Place your Meta Portal on a stable flat surface, like a tabletop or counter. Do not place your Meta Portal near areas where it might get wet, sources of heat or where it may be tipped over easily. (example: near sinks, showers, pools, stoves, ovens, or radiators.)
  4. Plug the power cord into the back of your device. If your Meta Portal comes with a charging dock, learn how to set up Meta Portal Go.
  5. Make sure the included power cord is fully plugged into your Meta Portal before plugging it into an appropriate outlet:
    • Your Meta Portal works when connected to a rated AC power source with 100V to 240V AC at 50Hz to 60Hz. Please review health and safety guidelines for more information.
    • Arrange any cables and cords so that people and pets are not likely to trip over or accidentally pull on them as they move around or walk near the Meta Portal.
  6. Leave at least 2 feet between your Meta Portal and any walls for best call quality.

Your device will power on automatically. To turn the camera off, you can slide the camera cover over it. Or you can press the camera and microphone off button at the top of the device.

To set up your profile:

Once your Meta Portal is plugged in, follow the on-screen instructions to begin setup. If you are visually impaired and need assistance setting up your Meta Portal, you can activate TalkBack by placing two fingers on the screen and holding down.

Follow the on-screen instructions to do things like choose your preferred language, connect to WiFi and connect with Facebook, WhatsApp or Workplace accounts.

Troubleshooting

If you have trouble setting up your device, these articles may help:

When you have finished connecting an account, follow the remaining on-screen instructions to complete setup.

Note: If you can’t log into your Facebook account, visit the Facebook Help Center.

Before you begin, learn what you need to set up your Portal TV. If you would like to use screen reader to set up your Portal, learn more about setting up your Portal TV using screen reader.

Plug in your Portal TV:

  1. Plug in the HDMI cable and power adapter, then connect the power adapter to a power source. Your Portal TV will turn on automatically.
  2. Plug the HDMI cable into an input on your TV. For best results use HDMI 1.
  3. Turn on your TV and select the input.

Find the right place for your Portal TV:

Your Portal TV may be mounted on top of your TV or placed on a flat surface underneath. Avoid placing your Portal TV directly on top of a speaker, too close to a speaker, directly on top of a sound bar or too close to a sound bar.

Your Portal TV is equipped with Dolby Atmos® sound, which requires Dolby Atmos® encoded streaming content and a compatible audio system to use.

Mount your Portal TV on top of your TV:

  1. Open the large clip.
  2. Open the small clip.
  3. Rest the front clip against the front of your TV frame. At the same time, press the front clip against the front of your TV frame and the back clip against the back of your TV.
  4. To make sure Portal TV is secure, press the back clip firmly against the back of your TV.

Set up your remote:

  1. Remove the plastic battery tab on the back of your remote control.
  2. Press Select, when prompted on-screen, to begin pairing the remote to Portal TV. Learn more about how to use your Portal TV remote.
  3. Follow the on-screen steps to finish setup.

Your Portal remote may require updating. This can take up to 5 minutes, depending on your connection. Make sure you don’t press any buttons or remove the batteries while the update is happening.

Learn more about what to do if you’re having trouble with your Portal TV remote.

Select your language and connect to Wi-Fi:

  1. Select your language.
  2. Connect to Wi-Fi by selecting your Wi-Fi network and entering your password. Select Continue to agree to download and install the latest Portal TV software. This can take about 15 minutes depending on your connection. If you have trouble connecting to your Wi-Fi, learn how to check your Wi-Fi signal.
  3. You may need to select Restart Portal to continue. If your Portal TV doesn’t automatically restart, you may need to unplug and plug it back in.

Give your Portal TV a name and log in with Facebook or WhatsApp.

Follow the on-screen instructions to continue the setup process.

  1. Give your Portal TV a name. Select an option from the menu or select Custom... to create a Custom Name.
  2. Connect your Facebook or WhatsApp account:
    1. Select Facebook or WhatsApp, then select Continue and follow the on-screen instructions.

To finish setting up your Portal TV, follow the remaining on-screen instructions to complete setup. You can do things like add favorite contacts, see how Smart Camera works, display your Facebook photos and learn more about using Portal TV.

Note: If you can’t log in to your Facebook account, visit the Facebook Help Center.
Share

Was this article helpful?

Yes
No

Still need help?

Tell us what you need support with and we’ll find the best solution for you.